If you have just purchased any acoustic materials, it may not be easy and take some time for you to choose the best location in a room to place acoustic panels. Likely, you’ve just determined where to position the acoustic pinboard panels and what soundproofing materials you’ll need.
When determining where to install acoustic pinboard panels in a space, it might be tempting to pursue the path of least resistance and choose the areas with the fewest impediments to going through. However, this is not the best strategy. After purchasing acoustic pinboard panels, this is by far the most frequent error people make, and it significantly impacts how well the panels perform their intended function.
Josh Duhamel’s net worth is a testament to his talent and hard work in the film and television industry.
Where to Put Those Panels to Block Noise
Planning for where to put acoustic panels could save both time and money. When installed correctly, acoustic panels can change the whole feel of a store, office, or classroom. First, think about the space you have and what you need. The acoustic panels you have and their usefulness can be very different in a home theatre and an office.
Five Ideas for Where to Put Room Acoustic Panels
1. The Recommended Height for Acoustic Panels
Where to put acoustic panels in a room depends greatly on how high the ceiling is. When planning where to hang the acoustic panels, you should consider the heights at which they will be hung. Since sound travels in a straight line until its path is blocked, putting acoustic panels too high or too low could make them less effective and cause the sound quality in the room to be bad.
2. The Distance Between the Sound Panels
If you’re looking up where to put the panels, it’s probably because you want to quiet down a noisy place. Noise can start anywhere, move in any direction, and bounce off any surface. For the best sound absorption, there must be enough space between acoustic panels.
3. Acoustic Panel Symmetry
A symmetrical arrangement of the panels is associated with optimal sound absorption. Acoustic panel symmetry, like panel spacing, aids in noise absorption and reverberation but is often chosen for aesthetic rather than practical reasons.
4. The Reflection Points Location
The location of reflection points should help decide where to put these panels in a room. Reflection points are where the sound comes back into the room. Regarding reflections, a large office with many mirrors will have more than a small office with only a few.
5. The Room’s Size and Shape
The size and shape of the room can also change where the panels are put. If the room is rectangular, the most common shape, the panels can be spaced symmetrically around the edges. How a room sounds will depend on how different it is from other rooms.
In places with a lot of noise, like office lobbies, a high ceiling could be a problem because it adds another surface for sound to bounce off. They recommend putting such panels on the ceiling of these kinds of rooms.
Conclusion:
Before putting acoustic panels in space for good, there are a few aspects to consider. With the help of acoustic panels, sound reverberation can be cut down, and a more peaceful environment can be made, but only if they are put up correctly. Keep in mind that the height, space, asymmetry, reflection points, size of the room, and design all play a role in how well these panels absorb sound.